Special Forces experts can handle all of your needs from interior to exterior, selective (partial removal) to complete demolition (the total removal of a structure, including its foundation). We especially enjoy working with clients in preserving historical structures, including facades and artwork.

Our trained professionals are well versed in environmental and safety concerns. A site safety supervisor is assigned to each project to oversee and enforce all OSHAand client-specific safety rules and regulations.

Each demolition project is unique and a site specific Health & Safety Plan (HASP), along with an OSHA engineering survey must be developed. A brief description of common steps, practices and methods of demolition is provided below

The typical razing of a building, structure, plant, factory, etc. is accomplished as follows:

  • Obtain all necessary permits
  • Install Soil and Erosion Control Measures as necessary
  • Isolate demolition area / perform all utility disconnects
  • Perform asbestos abatement when necessary
  • Removal all lights, ballasts, mercury switches, freon, etc. for recycling
  • Removal all hazardous materials when necessary .

Demolition Operations:

Hydraulic excavators may be used to topple one-or two-story buildings by means of an undermining process. The strategy is to undermine the building while controlling the manner and direction in which it falls. The demolition project manager/supervisor will determine where undermining is necessary so that a building falls in the desired manner and direction. The walls are typically undermined at a building's base, but this is not always the case as building designs may dictate otherwise. Safety and cleanup considerations are also taken into account in determining how the building is undermined and ultimately demolished.

In some cases a crane with a wrecking ball is utilized to demolish the structure down to a certain manageable height. At that point undermining takes place as described above in first paragraph

In order to control dust, fire hoses will be utilized to maintain a wet demolition. Hoses may be held by workers, secured in fixed location, or attached to lifts to gain elevation.

Loaders or dozers may also be used to demolish a building. These loaders and bulldozers are typically equipped with "rakes" (which are thick pieces of steel which could be an I-Beam or thick steel tube) that is used to ram building walls. Skid loaders and loaders will also be used to load materials out and sort steel.

Safety is always paramount on each project. A site safety officer is assigned to each project and enforces all OSHA and client specific safety rules and regulations.

  • Comply with all applicable environmental, health and safety (EHS) laws and regulations, including federal, state and local requirements.
  • Provide a healthy and safe environment for all employees, contractors, and visitors with the goal of zero accidents.
  • Promote pollution prevention, including the conservation of energy, water and raw materials resources, and ensure that all waste is handled and disposed of responsibly.
  • Provide employees with initial and refresher training in occupational health and safety, hazardous
  • Provide employees with initial and refresher training in occupational health and safety, hazardous materials management, fire prevention and response, and environmental awareness, consistent with the highest standards of professional practice.