Water Damage leaves many seen and unseen damages in a building and often is the most destructive damage of any disaster. Visible damage can include wet carpet or floors, stained walls, ceilings and furnishings as well obvious structural damage. Often it is the unseen destruction that can cause the most devastating damage. Walls will absorb moisture, which in turn will allow mold and fungi to run rampant.

Immediate response is critical when dealing with a home or business that has suffered a sudden or accidental flood. If the humidity in the building is not brought under control in short order, significant secondary damages will result. Beyond ruining the flooring, furnishings and walls it causes mold and fungi to grow anywhere moisture is trapped, in turn leaving a significant health risk to you, your family or business. Hazardous contamination, structural decay and dry rot and severe health problems are often related to a mishandled water damage restoration. Special Forces will properly extract the water, dry, dehumidify and stabilize the building in order to avoid further losses. Once the humidity is reduced to a level that will not cause further damage or support microbial growth, we will fully restore your home or business.

Water damage usually occurs in the following five stages:

Stage 1:
The free-flow of water by gravity. Gravity will level out the available water and cause it to find cracks in the floor, plumbing penetrations and many other openings. This affects the floors below as well as other adjacent spaces. Quick action at earlier stages of water damage will reduce the costs and resulting cleanup. On the other hand, delaying action increases both exponentially.

Stage 2:
The wicking of moisture into material that comes in direct contact with water. Damage continues to increase as long as free-water touches gypsum board, wood floors, furniture and documents due to the tendency of materials to draw in moisture through capillary action. This damage is mitigated by quick and thorough water-extraction, as it will remove the free-water and stop the wicking. Effective action at this stage will drastically reduce the time and effort to dry out the wet building materials.

Stage 3:
High humidity damage. This occurs when the moisture on and in the wet materials begins to evaporate, saturating the surrounding air. Previously unaffected materials now take on moisture. Early signs of high humidity damage include condensation forming on walls, ceiling tiles sagging from high moisture content and paper stock taking on moisture to the point it cannot be used for copying. This damage is mitigated by controlling the relative humidity inside the building through the use of high-capacity dehumidifiers. Quick action at this stage will keep the moisture content of the building material and contents below the threshold at which they will support microbial growth.

Stage 4:
Active microbial growth. This begins when materials have taken on sufficient moisture to be able to support mold and mildew. The threshold for most cellulose-based material (i.e., wood, documents and the paper covering on gypsum board) is when their moisture content exceeds 20 to 25 percent of their weight. Reducing this damage is accomplished by controlling three key conditions of the building's air: relative humidity, temperature and air circulation. Controlling these will create an environment that will rapidly dry the materials back to their pre-loss moisture content. Effective action at this point will generally confine the damage to the area that was directly affected by the water damage event.

Stage 5:
The spread of microbials to other areas, originally unaffected areas of the building. The spread of microbials (i.e., mold, mildew, odors and other pathogens) may eventually occur due to unchecked microbial growth in the affected area, the movement of people throughout the building, air circulation systems and/or elevator movement from floor-to-floor. If this stage of water damage occurs, a comprehensive plan must be put together involving various indoor air quality professionals and contractors. Quick and effective action at the earliest possible stage will reduce interruption to the business, reduce overall restoration costs and increase the likelihood that irreplaceable items will still be usable. This type of needed action can be facilitated by:

• Qualifying a drying contractor prior to any loss.
• Communicating your agendas and plans with the contractor.
• Placing them into a written disaster recovery plan (DRP).

home | fire damage | water damage | mold remediation | emergency tips | team profiles | project photos | us and the community | references | contact us
© Copyright 2004 machiela web development